Burner light stays on....No element is hot....not sure which switch is the culprit....suggestions?
ANSWER Hello Bill. You need to test and see which switch is closed on the P terminal and passing power to the light. Then you will find the bad switch in the unit. You can test this with a multi-meter TJMA-DMT3. Here is a link on how to use a multi-meter. http://forum.appliancepartspros.com/oven-repair-including-ranges-cooktops/4810-how-check-continuity-ohmmeter.html
Answered by AppliancePartsPros.com | Monday, June 24, 2013