24/7 Customer Support

:

Customer Questions and Answers for Switch-Dis by Whirlpool

  1. Our Price $49.84
    Compare At $59.81
    You Save $9.97
    • Part Number: AP5804547
    • MFG Part Number: W10665207
    • Made by: Whirlpool
    Add to Cart

Questions & Answers

For Whirlpool Switch-Dis (Part Number: AP5804547)

Answer or Comment

View all Questions

Note: This question is for the older version of this part, but we thought you might still find it helpful

whirlpool duet front loader fh error code, unit over fills with water about half way, new water level psi switch and has no flow meter. runs about 12 to 15mins shuts down with fh code. all dianostics come back clean. think'n micro computer might be shot. where can i go on line to read a service manual for this unit.

Mike for Model Number ghw9160pw1

ANSWER Hello Mike, The FH fault code means that the machine is not recognizing that it is filling with water. The machine has to see either 10.5 gallons in 8 minutes or, water filling the machine in the first 30 seconds. To clear the code, press pause/cancel twice. The cause of the failure can, of course, vary. The most common cause of the failure is either a bad flow switch or stopped up screens in the cold water inlet hose or the screens stopping up in the water inlet valve 8181694. The cold water normally gives the issue since the mineral deposits and sedimentation in the hot water side normally remains in the water heater. The second most common cause is the pressure switch W10514214 failing or the pressure switch hose stopping up or getting a hole in it from the tubs shaking around during normal operation. The hose can also become pinched or stopped up with lint from the wash load. 

Answered by AppliancePartsPros.com   |   Friday, August 24, 2012

We are Safe, Secure, Dependable and Trusted
  • BizRate.com Customer Certified Site - Click to Verify