Maytag Model# MDE9700AYW Dear sirs,
Can you assist me in diagnosing this problem.
I have tried as per your phone support suggestion, changing the thermistor and micro switch, but had no luck
When I turn it on dryer lights respond normally.
If I open the door, the door indicator shows it is open, so the door is not the problem
When I press start, I hear a faint click and lights on progress bar turn red and move as if dryer is running, although the dryer does not heat up or spin. After a few minutes dryer will beep as if cycle is done.
Have you ever seen this can you advise.
Joe Jmaggio@fnol.net 516-903-1852
ANSWER Hello Joe. Either the thermal fuse is bad or the control board needs to be replaced on the unit. Check the fuse first.You can test this with a multi-meter TJMA-DMT3. Here is a link on how to use a multi-meter. http://forum.appliancepartspros.com/oven-repair-including-ranges-cooktops/4810-how-check-continuity-ohmmeter.html
Answered by AppliancePartsPros.com | Monday, November 11, 2013