Dryer control panle light up when power is turned on. Thermal fuses and fuses check ok. 220 to back of dryer. When start button is pushed you hear a click and nothing happens. Timer will count down.
ANSWER Hello John. You need to test the thermal fuse and make sure it is good. If so, then test the door switch aslo. Both parts should read closed for continuity. If both parts are good, and there is power to the motor, but the motor does not run, you will need to order and replace the motor in the unit. You can test this with a multi-meter TJMA-DMT3. Here is a link on how to use a multi-meter. http://forum.appliancepartspros.com/oven-repair-including-ranges-cooktops/4810-how-check-continuity-ohmmeter.html
Answered by AppliancePartsPros.com | Tuesday, February 26, 2013