Changed igniter (broken) still no heat could thermal fuse be problem? Checked all others on burner, seems ok
ANSWER Hello Bill. Test and see if your getting power to the igniter 279311. Also test the thermal fuses W10423382 and flame sensor 338906. They should read closed for continuity. Check the coils 279834 and see if they test good. You can test the coils using a multi-meter TJMA-DM1. The two prong coil will read 1,000-1,300 ohms, and the three prong coil will read 1,300-1,400 ohms across prongs 1&2, and 500-600 ohms across prongs 1&3. Hope this helps.
Answered by AppliancePartsPros.com | Thursday, March 31, 2011