We did a load of drying good, and then tried to restart another load and the power on the board comes on but it will not start?
Did a diagositic check and it says code F-25 which says its the "inlet Thermistor"? Can that just go out like that with no other warnings?
ANSWER Hello Mark. Yes, the thermistor 8577274 can go out at any time. If the code is saying that, you may need to replace the thermistor. You can test the thermistor. It should read around 10,000 ohms at room temperature. You can test this with a multi-meter TJMA-DMT3. Here is a link on how to use a multi-meter. Hope this helps. http://forum.appliancepartspros.com/oven-repair-including-ranges-cooktops/4810-how-check-continuity-ohmmeter.html
Answered by AppliancePartsPros.com | Thursday, August 04, 2011