Dishwasher works good, the last couople of weeks it will not drain or complete the dry cycle water will sit at the bottom. but if you restart the dishwaser over it will not over flow it will drain but when it comes to the last cycle that is the dry cyle it just stops an wont complete it. Do you think it is the timer?
ANSWER Hello Steve. I would check and make sure the pump is not clogged and see if there is power coming to the pump during the end of the cycle. If so, you may need to replace the pump or remove and clogs in the pump or hoses. You can test this with a multi-meter TJMA-DMT3. Here is a link on how to use a multi-meter. http://forum.appliancepartspros.com/oven-repair-including-ranges-cooktops/4810-how-check-continuity-ohmmeter.html
Answered by AppliancePartsPros.com | Tuesday, September 25, 2012