Our dishwasher Control Panel has only the control lock, sanitized, clean light illuminated. None of the cycle or options buttons will light up if pushed. Start or Cancel will cause the control lock, sanitized, clean light to blink a few times and then stop. We are unable to start the dishwasher.
ANSWER Hello Donald. Check the door switches and make sure they are good and if so, you will need to order and replace the control panel on the unit. You can test this with a multi-meter TJMA-DMT3. Here is a link on how to use a multi-meter. http://forum.appliancepartspros.com/oven-repair-including-ranges-cooktops/4810-how-check-continuity-ohmmeter.html
Answered by AppliancePartsPros.com | Saturday, March 23, 2013