washer arm assembly #ap3129618 makes clunking noise and is loose, canmove side to side.Can you tell me how to remove it and inspect for other damage ie bushings seals and so forth.And then replace with a new item or repair parts TY.
David S for Model Number 66513843k601
ANSWER David, There should be some "wobble" in the spray arm assembly(s), but not as much as you imply. Here is the reccomended procedure : Removing the Inner Feed Tube and Lower Spray Arm The Inner Feed Tube is held in place by two (2) screws. One is located on the inner top of the dishwasher tub. The second is located on the back of the dishwasher tub.1. Remove the two (2) dishracks from the dishwasher tub. 2. Remove the two (2) screws securing the Inner Feed Tube to the inside of the dish washer tub. 3. Rotate the rear feed cap ΒΌ turn clockwise. 4. The entire inner water tube assembly and the lower spray arm assembly can now be removed from the dishwasher tub." The "thumb screw is a standard thread( turn it counterclockwise) and the hub is a "twist fit" on the hub of the feed tunnel. Thanks and Good Luck
Answered by AppliancePartsPros.com | Tuesday, November 01, 2011