Can you provide detailed instructions on changing the washplate in this model. Also if something is out of stock, How long does it usually take before coming in stock again?
ANSWER Stephanie, here are the instructions on removing the wash plate in your washer, 1) unplug power cord from outlet 2) Tape the washer lid closed. 3) Using a putty knife, press and unlock the two front top locks. The locks are approximately 6-1/2? from the outside edge of the washer.1. Unplug washer or disconnect power. 2. Raise the cabinet top . 3. To remove the basket: a) Loosen the clamp and pull the recirculation hose off the tub ring. b) Pry out and unsnap the tub ring tabs from the tub and remove the tub ring. c) Insert the blade of a small screwdriver into the slot in the impeller cap, then pry the cap up, and remove it. d) Remove the 7/16? hex-head bolt from
the impeller, then lift and remove the impeller from the basket. NOTE: Lifting the basket will assist in removing the impeller.
As for parts delays or backorderred parts availibility, We have no idea, it is dependent on the manufacturer production schedule, but it is in the area of 10 to 14 days on average. Thanks and Good Luck.
Answered by AppliancePartsPros.com | Thursday, April 14, 2011