Reattaching leads to valve assembly: I neglected to label the solenoid closest to the water output regarding attachment of the white or red wires. I did label the other solenoid and all the wires (top red, top white, bottom red, bottom white). So I am not positive how to reconnect the wires to the solenoid closest to the water outlet. Question: Regarding the solenoid closest to the water output, does the red wire connect closest to the water input (similar to the connection on the other solenoid), or on the other side? If a diagram is available, that would help! Thanks.
ANSWER Hi. Water Inlet Valve Assembly Part Number: 21001932. The purple and whit wires are for the valve. The pink and white wires are for the hot water valve. Look on the back cover to see the stamped "C" and "H" for orientation. Without the model # you can hook them up and select cold or warm wash. Then lift the lid and feel to see if the correct wiring was used. Make sure the fill hoses are verified by using a bucket to flush out hose sediment and to tell correct house water supply valve/ hose combination used. (Making sure the hot and clod water hose is connected to the unit water valve). There is a supplied wiring diagram in with the unit in behind the timer. Thank You.
Answered by AppliancePartsPros.com | Thursday, November 15, 2012