Our washer is not filling right. The water trickles in and takes awhile to fill then everything else is great. We have checked the hoses and everything looks good. We have a whirlpool mod# lxr9445jq1 and ser. # cl2425405 type 107. We had a repair person came and work on the dryer and he tipped the washer forward alot to get behind it and to get the dryer back in place. Dryer heating elements were broken and replaced. But when he put the washer back and left . Went to use the washer and the water was not coming in but a trickle. My husband looked at it and the water is turned on full and when you turn the knob on washer to hot almost no water and some with cold but on warm you get a alittle more than a trickle and it takes 20 minutes or more to fill. Do you have any suggestions what might be the problem? Thanks-stacy
ANSWER Hello Stacy. Based on the information you provided, check and make sure the screens are not clogged in the unit, and if not, you will need to order and replace the water valve 285805 in the unit.
Answered by AppliancePartsPros.com | Wednesday, October 24, 2012