My Whirlpool washer fills with water properly at all wash levels, but does nothing else, i.e., won't agitate drain or spin. The timer advances normally and from all indications the lid switch works properly. There's no noise and/or humming of any kind. Any suggestions as to what the issue may be?
ANSWER Hello Chris. You will need to check the actuator 359807 and the lid switch 279347 on the unit to see if they are bad. You can test this with a multi-meter TJMA-DMT3. Here is a link on how to use a multi-meter. http://forum.appliancepartspros.com/oven-repair-including-ranges-cooktops/4810-how-check-continuity-ohmmeter.html
Answered by AppliancePartsPros.com | Friday, August 29, 2014