24/7 Customer Support

:

Customer Questions and Answers for Window-Kit by Whirlpool

  1. Our Price $285.11
    Compare At $336.43
    You Save $51.32
    • Part Number: AP3124577
    • MFG Part Number: 9781721
    • Made by: Whirlpool
    Add to Cart

Questions & Answers

For Whirlpool Window-Kit (Part Number: AP3124577)

Answer or Comment

View all Questions

can you please tell me how to replace the inside glass of my oven door by using kit# ap3124577 ?

Eyal Plotnik for Model Number Kitchen Aid model# KESC3B7BWH2

ANSWER Eyal, Here's the information you need" 1. To remove the oven door, open the door to its first stop. 2. Grasp the sides of the door, lift it slightly, and pull the door forward until the hinge hangers are partially out of the slots in the chassis. Do not completely remove the hinge hangers from the slots, since there will be spring tension on them. 3. Reposition the angle of the door to its vertical position to remove the spring tension on the hinge hangers, then pull the hangers the rest of the way out of the chassis slots. REMOVING THE DECORATIVE GLASS, THE OVEN DOOR HANDLE, THE HINGES, AND THE OVEN DOOR GLASS 1. Remove the oven door from the range. 2. Place the oven door on a padded work surface with the decorative glass and handle facing up and the bottom edge facing the front. 3. To remove the decorative glass: a) Remove the four decorative glass retainer screws, and remove the retainer and two side trims. b) Lift the decorative glass off the door. 4. To remove the door handle: a) Lift the air vent and handle off the door. b) Remove the four handle screws (two on each side) from the air vent and remove the handle. 5. To remove a hinge: a) Remove the two bottom screws from the hinge you are servicing. NOTE: If you are removing both hinges, remove the steam deflector. Note how the deflector is mounted between the two hinges. b) Remove the bracket and retainer screw from the top of the hinge. c) Remove the bracket, retainer, and hinge from the door. 6. To remove the inner and outer oven door glass: a) Lift the insulation retaining plate off the door b) Remove the insulation and outer oven glass from the door. c) Remove the screws from the seven oven glass spacer retaining brackets and remove the brackets. NOTE: When you reinstall the brackets, make sure that you position the arrows on the brackets towards the glass spacer. d) Lift the glass spacer and the inner oven glass off the door.e) If you are replacing the rope insulation, remove it from around the oven glass opening in the door." That should get you through the repair. Thanks and Good Luck 

Answered by AppliancePartsPros.com   |   Friday, December 30, 2011

We are Safe, Secure, Dependable and Trusted
  • BizRate.com Customer Certified Site - Click to Verify