Dispenser Assembly

Guest for Model Number SHU9915UC/11

Answer Hello. You will need to replace this as an assembly. Thanks. 

1 person found this answer helpful.

Guest

Answer Hello. These are not hard to install. Just remove the inner door panel, and gain access to the screws holding the dispenser in place. Hope this helps. 

1 person found this answer helpful.

Carol for Model Number SHU4306UC/06

Answer Hello Carol. No, it does not come with instructions. All you need to do is disconnect the power to the unit. Remove the inner door panel, and remove the screws holding the dispenser in place. Reinstall in reverse order. Hope this helps. 

1 person found this answer helpful.

Jdb for Model Number SHU43C06UC/17

Answer Hello JDB. You will need to order part number 488964 for the dispenser assembly. 

Jean for Model Number sb908

Answer Hello Jean. The model number you provided is not working. We will need your model number to help you with this. Please post your model number with a new question on the parts page. http://www.appliancepartspros.com/modelnumber_locator.aspx 

Alphonsio for Model Number SHU33A06UC/22

Answer Hello Alphonsio, The rinse aid dispenser holds enough rinse aid to last 2 1/2 to 3 months as per the manufacturer. The manufacturer, as far as I know, has never listed the capacity in ounces. The rinse aide is squirted into the dispenser door at the adjustment arrow as you stated. You need to make sure the setting is somewhere between 1 1/2 and 2. It should never be adjusted to over 2 since rinse aid foams. This will cause leaking from the front of the door and possibly a fault code, depending on the model.