My thermal fuse 82987 tripped after 3 bake cycles on lower oven of model numberECPS230S Dacor oven. Could problem be ERC relay sticking?
Answer Hello Al. You need to check and see if the temp probe is bad or if the board is bad and is causing the unit to over heat and trip the fuse. The sensor should read 1100 ohms at room temp and 1650 ohms at 350°. You can test this with a multi-meter TJMA-DMT3. Here is a link on how to use a multi-meter. http://forum.appliancepartspros.com/oven-repair-including-ranges-cooktops/4810-how-check-continuity-ohmmeter.html