Bought a used dryer went through it before putting in service to insure things were ok
Clifford R. • Bay St. Louis, MS • December 17, 2014
My Repair & Advice
Found belt tension idler worn down to the bushing, found the drum rollers stiff and hard to turn, found belt worn and starting to crack. Ordered all of these plus front slide pads. Replaced and now feel confident the dryer will run without problems.
Absolutely need a pair of snap-ring pliers for this job. I used a high temp grease on the roller shafts, some info on what lubrication is recommended would be good.
While dryer is disassembled, clean/vacuum all the lint from the cabinet, motor, blower, heaters.
Took more time to clean dryer than to replace parts.