Replace water paddle.
Answer Hello Don. 241685703 is the water paddle. To gain access to the control area you will need to pull the drip tray out first. With the drip tray removed, remove the 3 screws at the bottom of the front panel. Lift up on the front panel, there are tabs on the top of the panel that slide into holes in the door panel. Swing panel out to side, being careful not to pull the wires out of the disconnect plug or the board itself. Carefully unplug the wiring harness from the touch panel on the front cover. On models with electronic control to gain access to the control, snap the light socket loose and remove the 6 small screws from the board. Pull board straight out of housing. Disconnect plug on left side of board. Disconnect 4 wires to dispenser actuator switches. With the board removed, remove the 3 screws from the dispenser housing and pull the dispenser forward. The ice door and actuator switches, as well as the return springs, can be serviced with the control module removed.