Frigidaire 154663005 Board - AppliancePartsPros.com

Total
$0.00

Part Number:	AP4390034
MFG Part Number:	154663005
Made by:	Frigidaire

Our Price
$170.77
Regularly	You Save
~~$204.92~~	$34.15

Most Interesting

My dishwasher blinks CL when I try to activate any cycle. I have already replaced the latch assembly. When I first installed the latch assembly it started to run properly, but I stopped it because it was empty. When I went to use it the next day it started flashing CL again. I have turned the circuit breaker off and no change. Do I need a board or control panel?

Jim for Model Number pld2850dc2

Answer Jim, Since you replaced the latch assembly, you want to make sure that there is no damage to wiring between the door switches and main board. If the wiring checks ok then you would need to replace the Main control board 154663005.

Was this helpful?

I changed circuit breaker as you suggested still doing same thing. On normal wash exactly 33.5 minutes in PF. than try to start cycle over 2mins in pump starts to pump than PF. Any suggestions?

Stanley for Model Number PLD2855RFC3

Answer Hello Stanley. Check the motor and see if it is over heating. Also, check the wire connections inside the junction box for bad connections.

Was this helpful?

3year old dishwasher goes thru approx 36 minutes of wash cycle than displays PF clear and restart runs about 3 mins than PF again displays. Bought part #154663005 board and installed does same thing still whats up?

Stanley for Model Number PLD2855RFC3

Answer Hello Stanley. Check and make sure there are no loose connections. If not, you may need to replace the circuit breaker for the dishwasher. It may be weak.

Was this helpful?

Latest Questions

During a regular wash cycle about 34 minutes in machine will flash PF. If you restart it will only run like 3 minutes then flash PF again. Where should I start?

Stan for Model Number PLD2855RFC3

Answer Hello Stan, You will want to check the unit power supply for loss of power during unit operation. The PF error code indicates a loss of power of more than 10 percent. Check to make sure that you are getting a constant 120 vac when the unit is getting this error code. If the power supply checks ok then you will want to check the wiring in the unit for short to ground.

Was this helpful?

Our Frigidaire model PLD2850RDC dishwasher control panel only works on the pots & pans cycle. No other cycles work when selected on the panel , they don't light up or work. When we select the pots and pans cycle we have to open and close door before that cycle starts, all other cycles wont work at all. thanks

Derek for Model Number PLD2850RDC

Answer Hello Derek. Based on the information you provided, it sounds like the insert 154459903 is bad and will need to be replaced on the unit.

Was this helpful?

We had a power failure. When power was restored, the dishwasher didn't work. In the past, after an outage, there is a flashing light on the dishwasher. Now, there are no lights, and none of the touch pad buttons work. There is power coming to the dishwasher (I checked the incoming wire at the bottom of the dishwasher. Note: we also lost 2 surge protectors and a wireless router in addition to the dishwasher..all at the same time shortly after power was restored.

Philip M for Model Number PLD2855RFC1

Answer Hello Philip. Check and amake sure the door switches are good and if so, replace the control board 154663005 on the unit. You can test this with a multi-meter TJMA-DMT3. Here is a link on how to use a multi-meter. http://forum.appliancepartspros.com/oven-repair-including-ranges-cooktops/4810-how-check-continuity-ohmmeter.html

Was this helpful?

Board

Questions & Answers

Appliance Compatibility Tool

Repair Help

Questions & Answers

Most Interesting

Latest Questions

Cross Reference and Model Information