Control Box

Paula L for Model Number frs6lf7jb3

Answer Hello Paula. Your model does not use the control box assembly. You need to order and replace the damper 241600902 in the unit. 

Mike for Model Number FRS26RLECS0

Answer Mike, Between the two previous posts and the information you'll receive in your email, you should be up and running in no time. Thanks 

Mike for Model Number frs26rlecs0

Answer Hi Mike. On the top lt. side of the controls are 2-side screws. The one in the back is longer and is a challenge to get back in. Then you remove the water filter cover and the hidden screw there that reaches to the front. There are 3- screws behind the top controls. Then you un hook the electrical connector on the side in the center. The damper is part # 241600902. Make sure you seal the damper to the side wall good. Thank You. 

Mike for Model Number FRS26RLECS0

Answer Mike, There are no fan(s) in the control or control box. The evaporator fan 5303918549 is located in the freezer compartment, you will need to remove everything in the freezer and remove the freezer back wall to access it. The condenser fan motor 5303918635 is located on the back of the refrigerator,inside the compressor compartment, behind the lower access panel. You most likely have a faulty evaporator fan motor. Thanks and good Luck