Does this burner come complete with ignitor/screws etc?
Answer Hello Troy! Yes, the burner assembly 5303935025 includes the burner, ignitor, orifice, and three screws. Thanks.
1 person found this answer helpful.
When attempting to remove the screws around the burner assembly, the screws all broke off. What is the best way to remedy/attach the burner to the top?
Answer Mike, You'll need to order the burner mounting screws 316069301 (at least quantity of 12) Then drill out the screw shaft(s) in the burner head assembly(s). You'll have to be careful and not drill out the hole in the burner.
How do I take out the old burner assembly and replace it with this new one? The stove top is a sealed burner type. Do I have to lift up the whole stove top?
Answer Hi Elle. You need to remove the burner caps, grates and all burner screws. Lay them aside so you can install them perfectly as removed. Remove all burner lower pans. Then remove the door. Look up under the top front and remove 2-hidden screws to allow you to lift the top. Use the prop rod or a wooden stick to support the top underside. Be careful to not damage the insulation with the support. Then all of the burners will "under" the top. You can now unscrew the gas supply tube from the burner needing changed. Make sure to snug the tube to the burner for no chance of leaks. The igniter now will unscrew from the bottom of the burner. Remember to reuse the burner orifice from the original burner. Thank You.