Burner`oven

Carol for Model Number FGF316BSB

Answer Hello Carol. Test for 3.2-3.6 volts AC at the gas safety valve with the igniter turned on. If the voltage is there, you have a bad safety valve. If the voltage is low, you have a weak igniter and the igniter will need to be replaced. You can test this with a multi-meter TJMA-DMT3. Here is a link on how to use a multi-meter. http://forum.appliancepartspros.com/oven-repair-including-ranges-cooktops/4810-how-check-continuity-ohmmeter.html 

Denise for Model Number FGF316ASA

Answer Hello Denise. You will need to test and see if there is 3.4-3.8 voltas AC at the gas valve. If there is not, the igniter 5303935066 may be weak and needs replacing. You can test this with a multi-meter TJMA-DMT3. Here is a link on how to use a multi-meter. Hope this helps.http://forum.appliancepartspros.com/oven-repair-including-ranges-cooktops/4810-how-check-continuity-ohmmeter.html 

Sam for Model Number TGF324WHSD

Answer Hello Sam. If the igniter is good, then test and see if you have 3.4-3.8 volts ac at the gas safty valve 3203459. If so, and the valve is not opening, you will need to replace the valve. You can test this with a multi-meter TJMA-DMT3. Here is a link on how to use a multi-meter. Hope this helps. http://forum.appliancepartspros.com/oven-repair-including-ranges-cooktops/4810-how-check-continuity-ohmmeter.html 

Sam for Model Number TGF324WHSD

Answer Hello Sam! The ignitor may be weak. Does it have a bright white glow to it? If not, it will need to be replaced. Your part number is 5303935066. Thanks. 

Guest

Answer Hello. You can look for rusted out areas or, if the flames are uneven. Hope this helps.