Clamp

Max for Model Number GLTF2940E

Answer Hello Max, Part number 134527100 is for the outer part of the bellow that goes around the front part of the door. Part number 134365300 is for bellow backside that would connect to the tub. 

Bud for Model Number GLTF2940ES

Answer Hello Bud. 134527100 is the correct clamp. You will need to install the door boot onto the front panel inorder to install the clamp onto the boot. It is very tight when trying to install it. 

Michael H. for Model Number LTF2140ESO

Answer Hi Michael. If the door glass is not smooth or the door boot part # 134515300 is ripped at 6;00 and not sealing shut, it will leak and cause the door boot clamp part # 134527100 to collect and rust. Thank You. 

Loni for Model Number FTF2104es0

Answer Hello Loni. No, there is no sensor under the clamp that would cause the washer not to spin. You will need to check the pump and filter inside the tub to pump hose and see if they are clogged. If so, this will prevent the machine from spinning. Hope this helps.