My oven wont go on..is this the right part I order?
You will want to check to see if the igniter is coming on. If the igniter is not coming on then you will want to check the igniter and the valve to make sure that they are good. Test for 3.2-3.6 volts AC at the gas safety valve with the igniter turned on. If the voltage is there, you have a bad safety valve. If the voltage is low, you have a weak igniter and the igniter will need to be replaced. If this checks ok then you would want to replace the clock assembly. You can test this with a multi-meter TJMA-DMT3. Here is a link on how to use a multi-meter. http://forum.appliancepartspros.com/oven-repair-including-ranges-cooktops/4810-how-check-continuity-ohmmeter.html
Is this unit easy to install? Can I simply remove the broken timer and plug in the new one.
Answer Hello Steven. Yes, the clock assembly 316418701 is very easy to install. Just disconnect the power and remove the back panel of the control panel. then you can access and replace the clock.