Control panel not working, only thing working is the oven light and I am getting the PF error code. Does the control panel need to be replaced on my Frigidare oven?
Answer Craig, Without a model number it's a bit difficult, and we can only recommend general checks. As for the PF error code, you will need to check the connections at the terminal block. Make sure the connections for the power are not loose or damaged and that both the breakers are set and locked in place. If the power supply is proper, then check the touchpad / membrane if equipped, then the ERC/Clock. If you could get a model number we can be more exact and precise and advise you better.
I turn oven on but neither the bake element nor the Broil element turn on. The display shows that the oven is functioning and the convection fan is spinning but no heat is coming from the element. Could this be the control panel, if not what else could it be?
To ensure that it is the control board you can test the board by putting unit on bake and testing for 240 vac from L1 to bake. If there is correct power then it would be the control board if there is not correct power then you will want to start checking at the terminal block for 120 vac from the outer terminals to the center. If either do not have power then it is home electrical or power cord.