The oven will not hold a constant temperature. The pre-heat will shut off prior to the proper temperature. We have changed the thermostat piece inside the oven but it still will not hold the temperature. Do we need to change the whole panel that includes the clock and timer since they work fine.
You will want to check the wiring from the oven sensor to the control board to ensure that there is no issue with the wiring. If that checks ok you will also want to check the oven safety valve coils. Make sure that they have to proper resistance. If the oven safety valve checks ok then the control board would need to be replaced.
i hit the clean oven button by accident and now no other functions will worki tried clear all and even cut off the power twice to reset it and all i get is door locked light blinking if i let the oven door actually lock then i get an F9 code and the beeper beeps if i leave the door ajar this doesn't happen what can i do to fix this? thanx don
Answer Don, Try this, Program the clean cycle and allow the control to operate for a couple of minutes, Then cancel the clean cycle. If the problem persists, or you still have the error code, you'll need to remove the rear body back panel and check the self clean door latch motor 316464300 switches and linkage to the front latch, to see what has become dislodged, loose, or broken.. Good Luck and Thanks