The ice maker does not switch between crushed and cube ice. I was able to remove the ice bucket and manually actuate the switch where the bail from the bottom of the bucket inserts into the switching mechanism at the rear of the freezer compartment when replacing the bucket and now I get cubed rather than crushed. Better, but better yet might be both. I'm guessing there is a solenoid of some sort back there that has failed. Please help with information and perhaps a part number. Thanks
Answer Hello Mark,
Make sure the solenoid 241675803 in the small hole in the back of the shelf the ice bin sits on is in the down position. It should move freely up and down. You can now check it by holding the door switch shut, chose cubes on the dispense control, and press the paddle for ice dispense. If it is working properly it should snap the solenoid into the up position. This solenoid kicks the arm on the bottom of the ice bin up so the ice can divert around the crusher blades instead of going through them.