Ref: J3....When attaching the connectors to the controller,there are 8 pins and 7 on the female connector. Do I connect starting from the left or right. This controls cooling fan oven light and door latch. Ref Display PCB-P11 thru P8.same problem. I would appreciate your help. Thank you so much.
Answer Hi. The female connector will have an external tab sticking out from one corner of the connector. It will quickly allow you to find the # 1 terminal. The control board has the male connector pins. Look closely and see the # 1 pin will not have # 2 pin. It will be "missing" on purpose to help denote correct pin connection. If your units wiring have a different amount of female connections then just make sure you are installing the correct wiring cable in the correct terminal bunch ( P1-P2-P3 etc...). The new control may have changed pin connection locations for the same wiring. They may have moved it to a different area. A control board is universal to similar models close to your type and have more connections for different functions. So it can be used in more then one unit. Thank You.
On the controller what does the L2 in, L2 out connect to?
Answer Hello Jeff. The L2 on the controller 316462805, L2 comes off the terminal block into the "in" terminal on the board, then "out" to the bake and broil elements. Hope this helps.