Convection fan no longer works. Found replacement part, convection motor, on your site. How do I replace it? Thanks
Answer Hello Marion. The fan blade is mounted in the rear of the unit and has a "D" shaped mounting hole. Only minimum clearance exists
between the oven back, fan blade, and fan shroud. Be careful not to bend blade when removing or installing.
Access to the fan blade is gained by removing the fan shroud, held in place by three screws, from the inside of the oven.
The fan blade is held in place with a hex nut that has left handed threads. When removing this nut, gently hold the
fan blade, and turn the nut clockwise. If one of the blades becomes deformed, it may be bent back into shape using
a flat surface as a reference.
A flat washer is located on the motor shaft between the snap ring on the shaft and the fan blade. You will need to access the back of the unit to remove the fan motor 5304467898. The fan motor on the rear of the unit is mounted to the main back with three screws. There is a mounting plate held
in place between the main back with 2 screws and the rear oven wall with 2 screws. Reinstall in reverse order. Hope this helps.