Freezer is cold/refrig is warm. I see the following 6 items could be the problem. Evaporator coils are frosted over; Damper; Thermistor; Temperature control board; Defrost thermostat; Main control board.
I can't find the Damper or the Thermistor in your parts section.
Also, do you have "how to" instructions for installing the above items where applicable?
Answer Hello Larry. If there is frost on the coils, It sounds like you may have a defrost problem with the unit. Check and see if there is any frost build up on the back wall of the freezer. If so, you will need to test the defrost heater and the defrost thermostat. They should read closed for continuity when cold. You can test this with a multi-meter TJMA-DMT3. I will include a link at the end to assist you how to use the multi-meter if needed. If both parts are good, you will need to replace the defrost timer. Once the problem is repaired, you will need to thaw out the ice on the coils before the unit will operate properly. http://forum.appliancepartspros.com/oven-repair-including-ranges-cooktops/4810-how-check-continuity-ohmmeter.html
What is the name of the part for a frigidaire refrigerator that covers the meat bin and has the gliders that the meat bin slides in and out on?
Answer Hi Carol, it's sometimes called the meat pan shelf. If you could provide your model number, I could be more specific and determine the part you need. Thanks!