Does the dispenser come with instructions on how to install it?
Answer Hi Dj. No, It is relatively simple though. Remove power. Remove top by removing 3-torx , t-20 security screws from the back to slide the top panel rearward and up/ off. Remove dispenser drawer by releasing the hold in tab when pulled out all the way. This will give access to 2 more screws in the front of the dispenser to be removed.(Phillips type). Then you get a towel to catch the water naturally left in all hoses. Remove the 2 spring clamps with a pair of pliers and pull dispenser hoses off the valve or couplers. Twist tub fill hose out of top of tub. Un hook rod from dispenser cam lever assy. Remove top 2- screws holding the dispenser to the top cross support bracket. Unclasp the front lower lock tab. Pull out and reassemble the new part in the reverse steps discussed. Part # is 131270310. Thank You.