The cold water threads are stripped. Can I buy just the tube if not
can I glue a maile connector to the stripped one?
Answer Hello Van T. No, based on the information you provided, you will need to order and replace the dispenser assembly 134409320 for the unit. You can not repair the threads on the unit.
Do both water inlets have washers on the end hooking to the hoses?
Answer Hello Aimee,
Both water inlet hoses should have rubber washers 60825,TJ70143 or they will leak. The first number is a plain washer and the second number is the washer with a screen. The screens are the ones that should be installed at the faucet end with the cone pointing toward the water pressure.
My washer is not dispensing the fabric softner and bleach. Is this the part that will fix that?
Answer Hello James. This part will fix the softener and bleach dispense issue as long as the control is sending voltage to the valve at the proper time. The best way to determine is to remove the main top and let the unit go through a cycle with a voltage indicator TJNCVT-2 ready to see if the voltage is being supplied to the valve. Otherwise, as long as the water valve screens are clear this is a common cause of the issue you have. I hope this was useful in solving your issue. Have a great day!