The door lock mechanism has 8 contact points. How do I test to determine if this unit is functioning?
Answer Hello David. If there is power across 2.1 grey wire and 4.4 black, and the unit does not lock, it is bad. The lock solenoid should ohm out at 1325 ohms. No power means board or wiring is bad. You can test this with a multi-meter TJMA-DMT3. Here is a link on how to use a multi-meter. http://forum.appliancepartspros.com/oven-repair-including-ranges-cooktops/4810-how-check-continuity-ohmmeter.html