Note: This question is for the older version of this part, but we thought you might still find it helpful
I see the boiler with 3 bends. Where is the oven element with 4 bends ?
Jean for Model Number 79096213408
Answer Hello Jean. It is located under the bottom panel in the oven. You can remove the panel by removing the two screws in the back and lifting the panel out. Hope this helps.
1 person found this answer helpful.
On part number 316206000 what is the correct ohm reading on the good part? What would a reading of 16 ohms mean?
Bill for Model Number 79092309012
Answer Hello Bill,
This means that this is a 900 watt element. We do not have the technical information available on specific Frigidaire built units. The information should be on the tech sheet either on the rear of the unit or in the drawer area, (the drawer usually has to be removed to access the tech sheet if it is in the drawer area).
Note: This question is for the older version of this part, but we thought you might still find it helpful
How do you replace the oven element?
Jean for Model Number 7099621 3408
Answer Hello Jean. Disconnect the power going to the unit. Remove the screws holding the element in place. Pull the old element out and disconnect the wires. Reinstall the new element in reverse order. Hope this helps.