There is a leak between the hose and the tub. There is no spot for clamp as previous answer stated. It appears there was a gasket that wore out but cannot see it on schematic. Can you help me find it?
Answer Phil, You're correct,there is no clamp holding the hose to the outer tub. You'll need to pinch and collapse the hose closest to the tub. and extract it from the hole. Make sure the interior lip, does not breakoff and remain in the tub. reverse the procedure to install the hose, and make sure the hose seats properly in the opening, and make sure there are no twists in the hose when mounted to the drain pump. You may want to test the washer for leaks before you button up the machine. Good Luck and Thanks
Hello, what silicon or glue I can use to install that house to the drum
Answer Daniel, You don't use any type of glue or sealant. The hose clamps 131306234 at each end of the hose has enough tension to hold the hose onto the tub and drain pump ports, without leaking. Just squeeze the "ears" together with a pair of pliers, and slide the hose off the fitting, reverse the procedure to install the hose. Good Luck and Thanks