Converting dryer from natural gas to lp
John M. • Townsend, GA • June 29, 2014
Appliance: Model ELECTROLUX EWMGD65HIW1
My Repair & Advice
Removing cabinet panels to access burner was the major challenge since every one seems to be different. This one, two screws at back allowed top to raise and be removed, Two more screws at front and two cables disconnected removed control panel. The door panel was not quite as obvious, The two screws at top sides and two at very bottom edge were removed. Then by trial, I removed screws around door edge until panel was loose. I removed a couple extra; but the whole door and panel lifted off. This now allows access to the burner assembly. The instructions with the kit took over at this point and was quite easy to follow specifying the one screw at the back, three screws on burner and two cables to disconnect. The burner come right out. The instructions gave exact details on changing burner parts and adjustments.
Most Helpful Stories
People found this story helpful
Repair Time Estimate