How do I find out what I need to convert stove from LP to Natural Gas? I have no orfices or instructions
In order to get the orifices to change the unit from LP back to Natural you will need to order the burner tubes. The right rear part number is 318167703, right front 318167700, left rear 318167702 and left front 318167701. The regulator will need the cap flipped from LP to natural.
do I need an orifice for the oven too?
Answer Hello Jeff,
On most units, the "hood" is not replaced but backed out 1 1/2 to 2 turns out to adjust back to LP. You may still need to readjust the air shutter to adjust the orange tipping out of the flame.
How do I get the cook top up to change the orfices to lp gas ?
Answer Hello Mark. There is no need to raise the top of the unit to install the kit 318127414. You will need to remove the burner heads to install the kit. Disconnect the power and remove the grates and burner caps. You will see two screws in the top of the burner heads. Remove those screws and lift the burner heads off the cooktop. Once removed, you will use a nut driver and remove the orifices from the orifice holders. Once removed, you will install the correct LP gas orifices into the holders and adjust the oven. Make sure the regulator is flipped to work with LP gas.