I ordered the membrane for my fridgidaire stove to fix the problem with the cancel button not working. The part number on both the new and old are the same, but the connection on the ribon cable is not the same. Does the plastic end on the new cable need to come off?
Answer Hi Jim. The switch membrane part # 316549114 is not pictorially shown in the parts breakdown in any view (ours and other resources). The white plastic cover is a protector that needs to be kept together with the ribbon cable tight up until the very point of contact. Be very careful to insert the cable and align the #1 pin correctly. You have the supplied wiring diagram in the control panel or in to the units inner frame after you remove the storage drawer. Thank You.
Push the light button and it does not work. Can not get the light off that is inside the oven.
Answer Hello Jim. You will need to check and see if the light switch 316445500 is bad on the unit. If so, it will cause the problem with the light staying on in the unit. Hope this helps.
The bake button doesn't work and the cancel button is difficult to make work.
Answer Hello Jim! It sounds like the ribbon cable is defective and needs to be replaced. The ribbon cable is only available with the membrane 316549114. Thanks!