What is the size of the opening for this orifice? Thanks.
Answer Hello Robert, While we don't have the exact size of the opening of the orifice, I can tell you it is for the smaller 5K burner. Hope this helps!
For the model stove I have listed I want to convert the bottled gas stove back to natural gas. What burner orifices do I need and what are the positions of the orifices. I believe Frigadaire made this stove for Sears. I would also like to know the dimension of the orifice openings.
Answer Robert, for the left rear and left front 9.5k burners use orifice part number 316237902, for the right front 12k burner orifice use part number 316237901, and for the right rear 5k burner orifice use part number 316237903. We do not have the dimensions of the orifice openings. The burner locations and sizes have been supplied, this should help you during installation. Please let us know if you need anything further. Thanks!
Hi, I need a list of parts to conver this range from lp gas to nat gas. Also what is the procedure for setting the gas regulator pressure. I assume I need five orifice's for the five top burners, what about the oven and warming drawer?
Answer Hi Pete. RT. rear is part # 316237903. Lt. Rear is part # 316237901. Lt. Front and center burner is part # 316237902. Rt. Front is part # 316430500. The gas regulator cap needs to be flipped over to visually see with a flashlight "nat". The cap itself has to be placed with the holder included with the holding threads,(See installation instructions supplied with your unit). The safety valve orifice hood has to be backed off from bottom -out position 2 to 2-1/2 turns. Adjust the shutter window so the flame does not lift off the burner(too much air). Thank You.