How do you get the oven bottom out so to replace it - Part #Ap3731407?
Answer Hello Bob. The bottom panel lifts out from the back. Hope this helps.
1 person found this answer helpful.
how do I install part number 316422601 , do have a video ?
To replace the panel 316400601 there are 2 screws at the back of the oven that you remove. Then you would need to lift the back of the panel up and slide to the rear then lift up and out once the front has cleared the lip.
I am trying to replace the oven floor pan. Trying to remove the 2 screws in the back of the oven but having much difficulty removing the screws. I have loosened them however, I cannot pull them out of the pan. Any suggestions? I look forward to your response and help!
Answer Hello Ken,
If the screws 5303285179 will not come out, you can use a pair of wire cutters under the heads of them to apply upward pressure while turning them counterclockwise. This will normally cause them to catch threads and back out. Do not do this to the screws if there is any chance of re-using the pan since this will cause the enamel to chip off of it.