How do you remove the selector knob and remove the timer?
Answer Mike, here's some information, it should get you through the repair : " Timer knob(some models) 1. The timer knob is held on by a locking rod that extends to the rear of the timer. To remove the knob,disconnect power, remove the rear panel of the console and using a small screwdriver pull the locking rod backwards to release the knob and remove it. Slide the dial skirt off the shaft housing. Removing the timer(some models) 1. disconnect the washer from electrical supply. 2. Remove the rear panel from the console and the timer knob and skirt. 3. Unplug the harness from the timer 4. Remove the screw holding the timer to the console front panel. 5. From the rear of the console lift the timer locking tab and slide the timer to the right top release it from the control mounting plate and pull back on the timer." Based on your model number this ought to get you up and running. Thanks and Good Luck.