Washer goes thru complete cycle. After cycle is done tub starts filling again.
Answer Hello Ray,
This is most likely either a set of contacts in the timer 137394000 stuck or the start button 134040800 is stuck electrically.
Washer will go thru full cycle but will not do final spin.
Answer Hello Richard. Based on the information you provided, it sounds like the door switch 131763202 is bad and will need to be replaced on the unit. Check and see if the door is locking properly. If not, replace the door switch. Also, make sure the filter in the hose from the tub to the pump is clear and is not clogged. Hope this helps.
My washer fills up and then will not agitate. Can you help me find out what is wrong with my washer?
Answer Hello Jennette. You will need to test and see if there is power coming to the motor 134869400. If there is power coming to the motor, and the motor does not run, you will need to replace the motor. If there is no power coming to the motor, you will want to test the motor control board 134149220. If there is power coming to the board, but not to the motor, you will need to replace the motor board. You can test this with a multi-meter TJMA-DMT3. Here is a link on how to use a multi-meter. Hope this helps. http://forum.appliancepartspros.com/oven-repair-including-ranges-cooktops/4810-how-check-continuity-ohmmeter.html