Electronic Display won't light up and Dishwasher will not fill.
Answer Hello Mark. Test for power coming to the control board 154470603. If there is power there, and the control doesnot work, you will need to replace the control board in the unit. You can test this with a multi-meter TJMA-DMT3. Here is a link on how to use a multi-meter. http://forum.appliancepartspros.com/oven-repair-including-ranges-cooktops/4810-how-check-continuity-ohmmeter.html
Dishwasher will not cycle gets stuck in wash mod and will not go out. CL comes up on display screen. Check manuel said was door switch replaced but still same. Is there a timer switch and if so what and were is it.
Answer Hello Carlton. First check all the wires inside the control panel and at the door switch and make sure they are good. If so, then the manufacture recommends replacing the control board 154470603 on the unit. Hope this helps.