Note: This question is for the older version of this part, but we thought you might still find it helpful
Both baking elements will not get hot. What can cause this?
Answer Hi, if both the broil and bake element is not coming on it can be a faulty control board. We will need to have your model number to locate the correct board for your unit. Thanks!
1 person found this answer helpful.
I got my switch for my stove but its been changed some the wiring spades are different. I now have a spade at s2 and only a single one at 4 where do the wires go on the switch?
Answer Hello charlie b. If you look on the old switch, you will see markings on the spades and these should match the new switch but may not be in the same location on the unit. Match L1 to L1 and L2 to L2 ect.... This should not be hard to replace on the unit.
Oven will not heat but all other pieces are working fine have had element checked what else could it be and how do I check for what it could be?
You will want to check the control board if the elements checked ok. To check the control board you will want to access the back of the control panel by pulling the unit out and removing the cover. With the unit turned to bake, check from L1 to bake for 240 vac. If there is proper voltage then you will need to replace the control board. If there is not then you will need to find where you are loosing power.