My washer will not stop filling and overflows. I have tried to switch to the small, medium and large settings and it happens on all of them. It will also not agitate, probably because it is stuck on the fill mode. I have to manually switch it to spin and then it will pump the water out and spin out fine. I think it is the pressure switch. Thanks for your help.
Answer Shane, Very good, you're on target. But first you want to check the air dome hose 5300771996. Disconnect the hose from the water level switch 131047500 and blow in the end of the tube, to clear any deposits or debris thay may have accumulated in it. Also check for any kinks, twists,pin holes or loose connections in the system. and try it. If it still overfils, repalce the water level switch 131047500. Good Luck and Thanks
Washer gets stuck in rinse cycle when using medium & large load, works fine in small load setting. Can you help? Is it the water level switch, pressure switch (don't know what it dose) or the main timer??
Answer Hi Don. Look at the inside of the water valve on the cold side. In the inlet screen, is it all clogged up with sediment ? It is a common washer failure to have the unit stall or not fill at the first rinse area. It is part # 134190200. Thank You.