Dishwasher will not cycle thru when I have on Hi Tepm water. What could be the problem?
Answer Hello John. Test the heater and thermal cut-off and make sure they read closed for continuity. If both are good, you will need to order and replace the control board in the unit. You can test this with a multi-meter TJMA-DMT3. Here is a link on how to use a multi-meter. http://forum.appliancepartspros.com/oven-repair-including-ranges-cooktops/4810-how-check-continuity-ohmmeter.html
Wash cycle will not work. Dishwasher will fill with water and will drain.
Answer Hello Mitc. Test and see if there is power coming to the motor kit 154859101. If so, and the motor does not run, you will need to replace the motor in the unit. You can test this with a multi-meter TJMA-DMT3. Here is a link on how to use a multi-meter. Hope this helps. http://forum.appliancepartspros.com/oven-repair-including-ranges-cooktops/4810-how-check-continuity-ohmmeter.html