Frigidaire 134048800 Thermostat-Cont-Elec W/m.s.

Thermostat-Cont-Elec W/m.s.

Total
$0.00

Part Number:	AP3210790
MFG Part Number:	134048800
Made by:	Frigidaire

Part Number:

AP3210790

MFG Part Number:

134048800

Made by:

Frigidaire

Our Price
$36.14
Regularly	You Save
~~$42.65~~	$6.51

In Stock — Ships Today Guaranteed

Quantity

Questions & Answers

3 Questions & Answers

Made by Frigidaire. Frigidaire brands include Electrolux, Frigidaire, Gibson, Kelvinator, Westinghouse, and others.
Electrolux also makes various appliance models for Sears / Kenmore

Appliance Compatibility Tool

Check your model number or use our Cross Reference Tool to find out if this part will work with your appliance.

Where can I find my model number?

Most Interesting

Dryer runs/no heat.

Bill W. for Model Number FERB7800DSO

Answer Hello Bill. Check and make sure you have 240 volts coming to the dryer. Check and make sure the unit is not set to Air Fluff. Also check the heater and thermostats and see if they are good. You can test these with a multi-meter TJMA-DM1. They should read closed for continuity. Here is a link on how to use a multi-meter. Hope this helps. http://forum.appliancepartspros.com/oven-repair-including-ranges-cooktops/4810-how-check-continuity-ohmmeter.html

Was this helpful?

Hello my dryer is overheating to hot to the touch in seconds after turning on, but does not shut down. I can see coils going on and off. Is there a thermostat that controls the amount of heat the dryer should put out? Vents are clean. Thanks.

Keith for Model Number fde7976fs1

Answer Hello Keith. The cycling thermostat 134048800 is the unit that cycles the heater on and off at certain temperatures. It sounds like it may be bad. Hope this helps.

Was this helpful?

My dryer won't start. I found only the light bulb broken inside the dryer. I have replaced the door switch, thermal fuse and light bulb. My dryer still doesn't start. Any suggestions? Could it be the fuse on the blower?

Dryerqueen for Model Number GLEQ640AS1

Answer Hello Dryerqueen. You will need to test and see if the start switch 134398300 is bad. If so, you will need to replace the start switch. Also, test and make sure you have the proper voltage coming to the dryer. You can test this with a multi-meter TJMA-DMT3. Here is a link on how to use a multi-meter. Hope this helps. http://forum.appliancepartspros.com/oven-repair-including-ranges-cooktops/4810-how-check-continuity-ohmmeter.html

Was this helpful?

Thermostat-Cont-Elec W/m.s.

Questions & Answers

Appliance Compatibility Tool

Repair Help

Questions & Answers

Most Interesting

Cross Reference and Model Information