Warning Plate

Meeska for Model Number 316065306

Answer Hello Meeska, You should check the current draw on the bake ignitor. It should read from 3.2 to 3.6 amps. This can be done with a clamp on amp meter TJCL1100 by clamping the meter onto one of the ignitor wires. If the current draw is below the specified amount, the ignitor will require replacement to restore normal operation. 

Becky for Model Number Frigidaire gas range

Answer Hello Becky. Test for 3.2-3.6 volts AC at the gas safety valve with the igniter turned on. If the voltage is there, you have a bad safety valve. If the voltage is low, you have a weak igniter and the igniter will need to be replaced. You can test this with a multi-meter TJMA-DMT3. Here is a link on how to use a multi-meter. http://forum.appliancepartspros.com/oven-repair-including-ranges-cooktops/4810-how-check-continuity-ohmmeter.html 

Lyn for Model Number 316259139

Answer Hello Lyn. Check and see if there is power to the bake. If not, replace the clock in the unit. Hope this helps. 

Nelson L. for Model Number 316065306

Answer Hello Nelson. You will need to look for a loose or burnt wire going to the switches. If there are none, then you will need to test for power coming to the first switch in the line and replace that switch. Hope this helps.