How to install Ice Maker Auger Part # AP2066373 for GE Side By Side Refrigerator
Answer Hello Clayton,
To install the ice maker auger, when you pull out ice bin and empty it, there are 4 screws that should be holding the front cover on. 2 screws inside the bin and 2 screws at the bottom part of bin. Once you remove the front cover then you would want to remove the screw at the back of the bin holding rod in place. Take note of how spring is on. You then want to remove the screws holding the crusher assembly in place and remove crusher assembly. Take screws out holding crusher face on and the nut on the front of auger. Once you remove the nut holding blades in place you will want to keep track of which way the blades go on. Remove the blades and drum and install on new auger. Reassemble.
How do I disconnect the rusted auger from the helix front, and replace it with the one I just received from you?
Answer Hello Mel. If you can not get the nut off, you may need to use a die grinder and cut the shaft of the old auger and replace the auger on the unit.