GE WB17X5095 Terminal Block - AppliancePartsPros.com

Total
$0.00

Part Number:	AP2021541
MFG Part Number:	WB17X5095
Made by:	GE

Our Price
$35.96
Regularly	You Save
~~$54.37~~	$18.41

Most Interesting

My oven heating elements will not turn off. I have to shut the oven off via the circuit breaker.

John for Model Number JBS16S1AD

Answer Hello John. Based on the information you provided, you will need to replace the control on the unit.

Was this helpful?

The oven is not preheating to the degree we set (at least it doesn't beep and the preheat light doesn't come on) but it is getting warm. It took about 1/2 hour longer to bake something than it should have. Is the baking element going out or something else causing this?

Mike for Model Number JBP24GW1AD

Answer Hello Mike. Check the bake element and see if it glows red. If so, then check the oven temp sensor. It should read 1100 ohms at room temperature. If so, then you will need to order and replace the control in the unit. You can test this with a multi-meter TJMA-DMT3. Here is a link on how to use a multi-meter. http://forum.appliancepartspros.com/oven-repair-including-ranges-cooktops/4810-how-check-continuity-ohmmeter.html

Was this helpful?

I have a electric GE range that is about 18 years old. All of a sudden the oven and broiler doesn't work. Called GE they sent out service and told us that the computer chip needed to be replaced but it is not available anymore! Seems a real waste! Everything else is working and a chip is costing us the price of a new range!!! Any help? Could we find the part somehow???? Thanks Linda

Linda for Model Number JBP45AS1Ad

Answer Hello Linda. Sorry, but the control has been permanently discontinued by the manufacturer and we don't know of any source or replacement for the part.

Was this helpful?

Latest Questions

Bottom element is overheating and burning food. We replaced the element thinking that was the problem, but it's not. I suspect it's something to do with the oven control knob, but would like some input before going that route.

Nlegere for Model Number RB757B

Answer Hello NLegere. Based on the information you provided, you will need to test the temperature sensor WB23X5340 in the unit. It should read around 1100 ohms at room temperature and 1650 ohms at 350 °. You can test this with a multi-meter TJMA-DMT3. Here is a link on how to use a multi-meter. Hope this helps. http://forum.appliancepartspros.com/oven-repair-including-ranges-cooktops/4810-how-check-continuity-ohmmeter.html

Was this helpful?

Broiler element does not get hot even though light indicates it is on. GE said I couldn't get parts because the stove is 12 yrs. old. Is this true?

Marg for Model Number JBP66BY4WH

Answer Hello Marg. What part are you needing for the oven? Thanks.

Was this helpful?

I have GE range that the light comes on indicating that it is getting power but no burners on the oven heat up. What part could be causing this problem?

Donna

Answer You will need to test the voltage coming to the stove and make sure it is 240 volts. Also inspect the terminal block for burnt wires. If all of this is good, you will need to start tracing the power to see where you are loosing it at. Hope this helps.

Was this helpful?

Terminal Block

Questions & Answers

Appliance Compatibility Tool

Repair Help

Questions & Answers

Most Interesting

Latest Questions

Cross Reference and Model Information